POLAR PANEL is a light weight, insulated concrete forming system made from rigid, high performance 2 lb. density expanded polystyrene (EPS) foam with extruded PVC channels and high strength composite connector ties.
TF FORMING System Thermoform-- Is a vertical panel ICF Homes system consisting of PVC studs and Poly panels 8" by wall tall up to 10'. Taller walls can be built by adding additional panels. Continuous PVC studs with top and bottom rail create a straight wall that does not move when concrete is poured.
InsulBuck was created as an alternative to wood and all vinyl block-outs for ICF Homes construction walls. InsulBuck is a fresh, economical and effective approach to creating block-outs in ICF Homes walls and will enhance any ICF project.
Insul-Tarp is an effective product for insulating under concrete slabs. Its lightweight, Space Age design integrates closed cell foam and reflective technology with a protective poly coating all within three, thin layers.
ULTRA TEX is a premium Quality ELASTOMERIC Acrylic Insulating CERAMIC Waterproofing TEXTURE COATING. A High Build Coating with Exceptional Durability and Weatherability.
SIDER-CRETE is a waterproofing coating for swimming pools and water features. This multi coat process levels surfaces and plasters ICF pools making them water tight and durable.
SureCrete formulated Wall Spray as a lightweight, sprayable, co-polymer based coating for increasing the flexural strength, fire rating, and “R” value of exterior surfaces.
INSUL-DECK is a stay-in-place insulating concrete forming system for precast concrete and joisted concrete floors and roofs. The panels integrate the insulating capabilities of EPS with the structural strength of metal inserts.
Form-A-Drain eliminates form boards for footers while combining the forming of the footer with installation of the French drain. This system collects both water and radon gas to be removed to a sump,
Platon is a rugged, dimpled high-density polyethylene (HDPE) membrane that keeps foundations and flooring dry. Platon creates an impermeable vapor barrier and air gap, allowing concrete to breathe while controlling moisture.
MATEEN-REBAR is the ultimate choice of composite reinforcement; commonly termed Fibreglass or FRP rebar. Manufactured from Owens Corning E-CR glass and an epoxy backboned resin matrix.
Helix works with the concrete to improve its performance. Helix increases the bending strength and raises the ﬁrst crack strength. It also improves ductility, or ﬂexibility, and adds considerable resistance to cracking.
SAFE ROOMS / Doors built with ICF are an easy and convenient way to add safety to an existing home or as a feature to an ICF Homes.
Swimming pools in ICF are a superior construction method for in ground, partial in ground or above ground Pools. Our pools are built with an R27 insulated wall to hold the heat of the water in the pool rather than heating the soil around the pool.
FastFoot Made of high density polytheylene fabric, FastFoot is a green replacement of lumber and plywood...
Zont Bracing System A 'twist' of the wrist quickly locks the horizontal waler and vertical strongback in position. Zont bracing is approximately 10% the cost...
Fast Form Fast Tube Fast -Tube is a 'soft' fabric column form for forming round concrete columns.
Fab Form Monopour -Pairs of side supports are screwed to the internal plastic web of the ICF block at approximately 6' on center. An electric drill + extended driver is used to quickly adjust the wall height.
EnergyEdge-EnergyEdge is the industry leader for slab edge insulation due from its patented rail systems. It's designed to decrease thermal transfer between the slabs and the exterior elements.